Flower [Allium] Shape Cutters

$5.50 AUD 

This variant is currently sold out

Blackbird & Violet Shape Cutters are 3D printed from PLA, a biodegradable plastic. They are specifically designed to be used in Contemporary Polymer Clay making, especially slab style earrings. Their cutting edge is approx 0.4mm & base is 3mm to support an easy cut-out.  Care instructions can be found here, please read before purchase and/or use.

This shape was designed to also accommodate Hoop makers & as such it is 50% taller than our standard cutters to allow for an easy cut through thicker slabs. 

 

Flower [Allium]
25mm: 25mm*
30mm:
 30mm*
35mm:
 35mm*
40mm:
 40mm*
45mm: 
45mm*
Full Set: one of each of the sizes above. Saves you 20% vs buying each individually.


*SIZE: These cutters are measured from the top of the cut out, to the tip of the base. The max width is on average 2-3mm wider than that measurement. Size is the 'inner' of the cutter & will be the size of the resulting shape cut out. All sizes are as accurate as possible but allow for a +/- 0.5mm variance.

FINISHING: All efforts are taken to reduce any bumps created by the printing process, however sometimes some slip through. These are light & can be easily removed during your sanding process.

COLOUR: Print colour varies & you may receive a different colour to that pictured or a mix of colours.

POSTAGE: 3D printed shape cutters are heat sensitive. If there is a chance your parcel will be exposed to high temperatures (Heat waves, International postal delays etc) we recommend you select EXPRESS post to avoid the slim chance of your cutters warping if exposed to direct heat.