These cutters are 3D printed from PLA & are specifically designed to be used with Polymer Clays. PLA is an Ecoplastic made from Bio Material (I.e Sugarcane pulp, corn starch etc) and is biodegradable.
They have approximately a 0.4mm cutting edge & a 3mm base to support an easy cut-out.
Size is the 'inner' of the cutter & the resulting shape cut out.Measurement is taken at the widest/tallest part of the shape. All sizes are approximate only.
First photo is on a matt with 10mm grid lines.
"Full Set" contains one of each size in this listing and saves you 10% vs buying each individually.
||19mm(h) x 20mm(w)
||25mm(h) x 26mm(w)
||30mm(h) x 32mm(w)
||35mm(h) x 38mm(w)
||40mm(h) x 45mm(w)
||45mm(h) x 48mm(w)
||50mm(h) x 55mm(w)
MADE TO ORDER:
All cutters are made to order, processing time is around 5 business days.
Cutters are not dishwasher or oven safe. While they are non-toxic, they cannot be exposed to temperatures over 60-70 degrees without increased chance of warping.
Wash with clean soapy water.
All efforts are taken to reduce any bumps or lines on our cutters, however sometimes some slip through. These are easily removed from your pieces in the sanding process.
Print colour varies & you may receive a different colour to that pictured.
Any earring images are to offer a visual for how cutters have be used. These earrings are not part of the listing nor should they be directly replicated.