B&V Earring Mold - Lrg Circle

Regular Price
$54.90 AUD
Sale Price
$54.90 AUD
Regular Price
Sold Out
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
Tax included. Shipping calculated at checkout.

Finish Shiny

B&V Earring Molds are handmade by us here at B&V HQ. We use high quality Barnes Transil tinted white - this makes it hard for us to photo BUT means that you can envision your art without the silicones colour getting in the way!

This large mold is 15cm by 20cm & contains the following shapes (all approx 3mm deep):

  • 08x 15mm Circles
  • 08x 18mm Circles
  • 04x 20mm Circles
  • 04x 30mm Circles
  • 04x 35mm Circles
  • 04x 40mm Circles

Perfect for making stud toppers & statement studs or dangles set collections. Can make up to 16 pairs of earrings in one pour!

Shiny vs Matte: Shiny molds will yield shiny faces on your pieces. Matte molds will have a satin/no shine face when demolded. For higher gloss or a domed finish, coat with a doming resin to finish your pieces.


B&V Handmade Mold info & care:

  • Not Oven or Dishwasher safe.
  • Intended for use with Epoxy or Acrylic Resins.
  • Not suitable for UV resin.
  • All measurements are approximate. 
  • Clean frequently using tape to lift resin pieces and dust.
  • Clean occasionally with soapy warm water. Dry & store flat & out of sunlight.
  • Due to the nature of silicone pigmenting, the molds may have variations in their depth of whites.
  • Due to the handmade nature of the mold, some minor flaws & imperfections may occur.
  • Molds have a "lifetime" and at the end of their life will begin to stick.

B&V Earring Molds are handmade by us here at B&V HQ. We use high quality Barnes Transil tinted white - this makes it hard for us to photo BUT means that you can envision your art without the silicones colour getting in the way!

This large mold is 15cm by 20cm & contains the following shapes (all approx 3mm deep):

  • 08x 15mm Circles
  • 08x 18mm Circles
  • 04x 20mm Circles
  • 04x 30mm Circles
  • 04x 35mm Circles
  • 04x 40mm Circles

Perfect for making stud toppers & statement studs or dangles set collections. Can make up to 16 pairs of earrings in one pour!

Shiny vs Matte: Shiny molds will yield shiny faces on your pieces. Matte molds will have a satin/no shine face when demolded. For higher gloss or a domed finish, coat with a doming resin to finish your pieces.


B&V Handmade Mold info & care:

  • Not Oven or Dishwasher safe.
  • Intended for use with Epoxy or Acrylic Resins.
  • Not suitable for UV resin.
  • All measurements are approximate. 
  • Clean frequently using tape to lift resin pieces and dust.
  • Clean occasionally with soapy warm water. Dry & store flat & out of sunlight.
  • Due to the nature of silicone pigmenting, the molds may have variations in their depth of whites.
  • Due to the handmade nature of the mold, some minor flaws & imperfections may occur.
  • Molds have a "lifetime" and at the end of their life will begin to stick.

*Volume:
This is an approximate guide only. We filled each & every mold with water & measured the outcome individually! Please allow a 5% variance up or down as a guide.

Some of the more decorative molds do not need to be filled to the top & can have a reduced volume if you wish.

We provide the volume as a guide for you to help in ordering resin & knowing how much to mix to reduce waste.

Longevity:
How many uses you get from a mold is dependant on many factors. You should expect well over 10 pours to come out of a mold. In the case of non-corrosive materials, you can get infinite pours!

It's hard to offer a number as some materials are more corrosive to silicone molds, such as epoxy resins, and will denature molds over time. Other materials, such as acrylic resins, are much more gentle.

Extend their life by ensuring you wash & dry well after use, storing in a cool dark place & with the heaviest part down to ensure the weight doesn't distribute unevenly.

As a standard, we recommend selecting Express Post* at check out. A lot of craft items such as Polymer Clay, Shape Cutters, Resins etc are heat sensitive.

By selecting Express Post, you can minimise the chance of your items encountering high heat events such as heat waves & delays.

In summer months we recommend avoiding Parcel Lockers for that same reason.

*For Australian customers. International shipping is ONLY Express at this stage due to high delays in the network during the pandemic & to avoid stress on your parcels.