Donut [Flower] Shape Cutters

$6.00 AUD 

This variant is currently sold out

Blackbird & Violet Shape Cutters are 3D printed from PLA, a biodegradable plastic. They are specifically designed to be used in Contemporary Polymer Clay making, especially slab style earrings. Their cutting edge is approx 0.4mm & base is 3mm to support an easy cut-out.  Care instructions can be found here, please read before purchase and/or use.

Notes on using Donut-style cutters:
🍩Make sure you take the time to press down the entire outer AND inner edges - they are 2-in-1 cutters.
🍩Cutting a hole in the middle removes the surface tension, your piece will be more delicate.
🍩Take the time to push out any clay that remains in the inner cut out between use, needle tools can be great for narrow spaces!


25mm x 22mm
30mm: 30mm x 26mm 
 35mm x 32mm
 40mm x 36mm 
 45mm x 42mm
Full Set: one of each of the sizes above. Saves you 20% vs buying each individually.

SIZE: Size is the 'inner' of the cutter & will be the size of the resulting shape cut out. All sizes are as accurate as possible but allow for a +/- 0.5mm variance. 

FINISHING: All efforts are taken to reduce any bumps created by the printing process, however sometimes some slip through. These are light & can be easily removed during your sanding process.

COLOUR: Print colour varies & you may receive a different colour to that pictured or a mix of colours.

POSTAGE: 3D printed shape cutters are heat sensitive. If there is a chance your parcel will be exposed to high temperatures (Heat waves, International postal delays etc) we recommend you select EXPRESS post to avoid the slim chance of your cutters warping if exposed to direct heat.