These cutters are 3D printed from PLA & are specifically designed to be used with Polymer Clays. PLA is an Ecoplastic made from Bio Material (I.e Sugarcane pulp, corn starch etc) and is biodegradable.
They have approximately a 0.4mm cutting edge & a 3mm base to support an easy cut-out.
SIZE:
Size is the 'inner' of the cutter & the resulting shape cut out.Measurement is taken at the widest/tallest part of the shape. All sizes are approximate only.
First photo is on a matt with 10mm grid lines.
"Full Set" contains one of each size in this listing and saves you 10% vs buying each individually.
17mm |
17mm(h) x 11mm(w) |
20mm: |
20mm(h) x 14mm(w) |
25mm: |
25mm(h) x 17mm(w) |
30mm: |
30mm(h) x 20mm(w) |
35mm |
35mm(h) x 23mm(w) |
40mm: |
40mm(h) x 26mm(w) |
45mm: |
45mm(h) x 30mm(w) |
50mm: |
50mm(h) x 34mm(w) |
MADE TO ORDER:
All cutters are made to order, processing time is around 5 business days.
CARE:
Cutters are not dishwasher or oven safe. While they are non-toxic, they cannot be exposed to temperatures over 60-70 degrees without increased chance of warping.
Wash with clean soapy water.
FINISHING:
All efforts are taken to reduce any bumps or lines on our cutters, however sometimes some slip through. These are easily removed from your pieces in the sanding process.
COLOUR:
Print colour varies & you may receive a different colour to that pictured.
PHOTOS:
Any earring images are to offer a visual for how cutters have be used. These earrings are not part of the listing nor should they be directly replicated.